How to repair a broken telescopic handle of a trolley case

As a very practical suitcase, the trolley case has a telescopic handle design that facilitates our travels. However, sometimes we may encounter a situation where the telescopic rod is broken, which brings inconvenience to our travels. So, when the telescopic handle of the trolley box is broken, how should we repair it? This article will introduce you to some simple methods to help you easily solve the problem of telescopic rod failure of the trolley case.

Step 1: Determine the cause of the fault

Before repairing the telescopic rod failure of the trolley box, it is first necessary to determine the cause of the fault. Common causes of failure include stuck tie rods, malfunctioning telescopic buttons, broken tie rods, etc. Through careful observation and inspection, you can determine the cause of the malfunction so you can take the correct repair method.

Step 2: Repair the rod stuck problem

If the rod of the trolley box is stuck, you can try the following methods to repair it:

1. Use lubricant : Spray an appropriate amount of lubricant on the tie rod, and then gently pull the tie rod so that the lubricant can penetrate into the gap of the tie rod and solve the jamming problem.

2. Clean up debris: Sometimes debris inside the trolley case can cause the trolley to get stuck. You can open the trolley box and clean out the debris inside the box to ensure that the trolley can be extended and retracted unobstructed.

Step 3: Repair the retractable button failure

If the retractable button of the trolley case fails, you can try the following methods to repair it:

1. Check the battery: The retractable buttons of some trolley cases are electric. If the button fails, the battery may be exhausted. You can replace the battery and retest whether the retractable button is working properly.

2. Check the line connection: The failure of the telescopic button may be caused by loose or damaged line connection. You can open the trolley box and check whether the wiring connection is firm. If there is any looseness or damage, you can use electrical tape to repair it.

Step 4: Repair the broken tie rod problem

If the tie rod of the tote box is broken, you can try The following methods are used to repair:

1. Use glue: If the broken tie rod is not severely deformed, you can use glue to repair it. First, smooth the two sections of the tie rod at the break with sandpaper, then apply an appropriate amount of glue, glue the two sections of the tie rod together, clamp them with clamps and wait for the glue to dry completely.

2. Replace the tie rod: If the tie rod is severely broken and cannot be repaired, you may consider replacing the tie rod. You can contact the manufacturer of the trolley case or a professional repair shop to purchase a suitable trolley rod for replacement.

End

Repairing the telescopic rod failure of the trolley box requires different methods according to the specific situation. Through the steps introduced in this article, you can have a preliminary understanding of how to repair the telescopic rod failure of the trolley case, and become more comfortable in the actual operation.Handy. If you are not familiar with repair operations or the fault cannot be solved by yourself, it is recommended that you seek professional help to ensure the repair effect and safety.

I hope this article will be helpful to you in repairing the problem of telescopic handle of the trolley case. I wish you a happy journey!